They started installing poles along a main road near where we live and I’m not sure what the white antennas on them are for. Some of the poles have traffic cameras like the one in the picture but others don’t. They are spaced every half to one mile and have antennas on opposite sides, with what looks like a radio cabinet near the base. The antennas are all aligned along the road, pointing parallel to traffic. This is in southwest Pennsylvania.

    • ShepherdPie@midwest.social
      link
      fedilink
      English
      arrow-up
      42
      arrow-down
      3
      ·
      2 months ago

      As for what it’s for, it could be anything.

      I’m pretty sure that’s what Bill Gates will be using to activate the 5G nanobots that we all received in the COVID vaccine.

    • WxFisch@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      10
      ·
      2 months ago

      That indeed looks like exactly what they are, which I should have known since I have a bunch of UniFi gear at home. I wonder what PennDOT is using them for.

    • borari@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      4
      ·
      2 months ago

      Those airfibers are massive fucking overkill for a single camera. I’ve aligned pairs of these that feed entire like 10-25 unit MDUs.

      • jake_jake_jake_@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        2 months ago

        if they are chaining them bandwidth will add up, and depending on the switching equipment they could be doing a large ring of some sort. it would be pretty easy to calculate since cameras are a pretty even throughput.

        Looks like a air fiber 24 which is only 1.5Gbps throughput, 8-24mbps per camera would mean between 60-200 cameras, which for a state transportation department wouldn’t be unreasonable, especially they are using these for something else, like interconnects between buildings for a metro-lan scenario.

  • Mellow@lemmy.world
    link
    fedilink
    English
    arrow-up
    16
    ·
    edit-2
    2 months ago

    It looks like a point-to-point relay. There appears to be two different sized dish antennas on each antenna “pod” which would indicate two different frequencies are in use. I’m sure it’s the method they’re using to transmit the camera feed back to a landline connection. The poles without a camera are probably just a relay to get the signal down the next hop in the chain, or maybe there is some other sort of sensor data being collected at those points.

    Looking at the UniFi stats azdle posted the dishes in the pod are separate send and receive dishes. The size denotes the dbi gain.

  • originalucifer@moist.catsweat.com
    link
    fedilink
    arrow-up
    15
    arrow-down
    1
    ·
    2 months ago

    big ol ubiquiti mesh network. many towns are covered in them. iirc ubiquiti made a name for themselves doing wireless in stadiums… had some solid firewalls/routers

    the new stuff is pretty at least