Hello,
I have a Nextcloud server installed at home that works well on my LAN network, but when I try to make the server accessible via a DynDNS service, I cannot connect to it. The request doesn’t even reach my server. My question is whether the router immediately blocks the request, because when I set the router to be accessible (it has separately that option), I can connect without any issues over dyndns url. Could my ISP (O2) be blocking it? I can confirm that it’s not a firewall issue, and it’s also not because I’m connected to the same WiFi as the server. It’s not a port forwarding issue either, as I’ve gone through all possible options. My router is a Fritzbox 6660, and there are no logs indicating that a request has even come through.
My second question is whether this is even allowed in Germany? Also, I’ve noticed that my ISP rarely changes my IP address; in fact, I haven’t seen it change at all in the past few months, which is strange because in my home country, it changed every 24 hours.
Edit: First, thank you all for your help. I will try your suggestions over the course of this week or month (due to time-related issues :) and will report back with the results. Since I am clearly a noob when it comes to self-hosting and I plan to have only a Nextcloud server for personal use, what is the best way to secure the system in these situations and allow only certain devices to access it over the external network? (if I ever manage to access it at all)
You must log in or register to comment.
Having been in this same position I think I can help, you are almost definitely being cgnat which means that you do not have your own ipv4. The two workarounds I used for this are to use only ipv6 which is public but means you can’t always access it from older networks. And the second solution is to wireguard tunnel to a free oracle VM and use it as a proxy.
If you google it, you’ll find lots of similar questions for O2. I think you have to contact their customer support and get that activated once.
And have a look at your IPv4 and IPv6 addresses. Sometimes you can do it via IPv6 already, just not over IPv4 because there is some translation in the way. (In case they want too much money to give you a real IPv4 address.)
Maybe you can try if you can open your FritzBox UI from the outside with your my.fritz address. I think that has IPv6 and a port forward in place (if activated).
And btw: It’s perfectly fine to do it. People need storage and online collaboration. Access to their data while away.
The myfritz can communicate with the fritzbox but trying to connect directly (as it’s not proxied) from IPv4 only will fail as well.
Isn’t myfritz plain old IPv6 directly to the router without any proxying or tunneling? If yes, communication would mean IPv6 packets make their way through the ISP to the router.
Depends.
If you connect to the MyFritz proxy service (https://sso.myfritz.net/) from AVM, then no
If you access your own myfritz adress, then yes. (https://example123987wpvor.myfritz.net:12345)But the only thing the myfritz page from AVM does is enable you to access some functions from the fritzbox like smart home stuff, your internet connection (type of connection, public IP, etc.)
Ah okay. I don’t have a Fritzbox here. I suppose that does the trick. My idea was to use that to test if incoming IPv6 works. So disregard any services on the Fritzbox itself and just see if you can access it directly. And if yes, configure an IPv6 port forward to the NAS.
Moat likely.
Some German cable providers do internal NATting please check that yours does not.
*CG-NAT
even allowed in Germany?
Yes.
works well on my LAN network, but when I try to make the server accessible via a DynDNS service
I guess your Fritzbox does NAT for your LAN. Then the dyndns address works only when the client is outside.
Does your router indicate that you have DS-Light? I think O2 provides each customer DS-Light until they ask for a real IPv4.
To your second question: In case of DS-Light you don’t need a new IPv4 IP every 24h because your IP is not public facing.
PS: I don’t be sure, but the Fritz Remote Apps use IPv6 to ensure that they also work with DS-Light.
Do you have o2 DSL, o2 fiber, or o2 cable/coax Internet? O2 cable does not have a public IPV4 address by default, you need to request one from customer service.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters CGNAT Carrier-Grade NAT DNS Domain Name Service/System IP Internet Protocol NAS Network-Attached Storage NAT Network Address Translation
5 acronyms in this thread; the most compressed thread commented on today has 6 acronyms.
[Thread #950 for this sub, first seen 4th Sep 2024, 05:35] [FAQ] [Full list] [Contact] [Source code]
Most likely you are under CGNAT, so your best bet is Tailscale, Wireguard, CloudFlare Tunnel or Zero Tier. Pick your poison.
Wireguard will only work if the cellular or ISP at, say the workplace, have an IPv6 adress or IPv4-to-6 translation
Usually German ISPs are giving you IPv6.
This so much of a lie.
Only the usual suspects (new fiber ISPs, Vodafone/KabelBW and O₂) do and usually on the coax and fiber contracts.And that’s the biggest ISPs, plus he can still use Tailscale or Zerotier and still be able to access his network. Plus IPv6 IPs should be easy to assign and won’t be paid or limited.
I had the exact same problem and the solution was to ask my ISP who then either just gave me a public IP (Vodafone) or asked for money so my network could be reached from the outside (Primerocom). So check whether there is an option with you ISP to get a “public” IP.
You checked if you have a DS-Lite contract? Those are very popular. Especially with O2, Vodafone and the fiber ISPs.
The problem: You get only an IPv4 CG-NAT IP and a regular IPv6 IP. If your ISP (for example at work) did not configure an IPv6, you will not be able to connect (A and AAAA DNS records).
I assume you set up the port forwarding in your Fritzbox (under Internet > Freigaben > Portfreigaben)?
If it has the proper external port connected to your internal port it should connect.Can you ping your domain? How about checking the DNS resolution? What DynDns do you use?
The problem was with DS-Lite tunneling, as some users mentioned, and it only works over IPv6. However, now I have another issue. My entire family has access through their ISPs, but my cellular data ISP does not support IPv6. Is there any workaround that doesn’t require me to look for a new ISP or asking for IPv4 address? 😀 By the way, thanks to everyone for the help!
Had the same issue. I have a VM at a hoster which proxies requests to my nextcloud server at home. Both the VM and my server on my home network are connected via tailscale. I’ve been using the VM for other stuff as well and happened to have it anyways, I didn’t get one just for this purpose
Maybe I should first ask the cellular provider for IPv6, because I misspoke; they support it but haven’t enabled it for me. If they provide it, then I won’t currently have a need for IPv4, but thank you for the advice.
i would just ask for an Ipv4 address. I asked Vodafone for one and they just gave it to me for free.
O2 charges 50 € for that last I heard
That’s insane. I would consider a ipv4 -> ipv6 cloud hosted haproxy style setup if this was my only option.
You get a real IP? Its been cg-nat with every provider for the last many many years in Italy.
I got a cheap vps and just run some reverse tunnels to map ports from it to my home server going trough my cg-nat.
