No? Afaik vsync prevents the gpu from sending half drawn frames to the monitor, not the monitor from displaying them. The tearing happens in the gpu buffer Edit: read the edit
Though I’m not sure how valid the part about latency is. In the worst case scenario (transfer of a frame taking the whole previous frame), the latency of an lcd can only be double that of a crt at the same refresh rate, which 120+ hz already compensates for. And for the inherent latency of the screen, most gaming lcd monitors have less than 5 ms of input lag while a crt on average takes half the frame time to display a pixel, so 8 ms.
Edit: thought this over again. On crt those 2 happen simultaneously so the total latency is 8ms + pixel response time (which I don’t know the value of). On lcds, the transfer time should be (video stream bandwidth / cable bandwidth) * frame time. And that runs consecutively with the time to display it, which is frame time / 2 + pixel response time. Which could exceed the crt’s latency
BUT I took the input lag number from my monitor’s rtings page and looking into how they get it, it seems it includes both the transfer time and frame time / 2 and it’s somehow still below 5 ms? That’s weird to me since for that the transfer either needs to happen within <1 ms (impossible) or the entire premise was wrong and lcds do start drawing before the entire frame reaches them
Although pretty sure that’s still not the cause of tearing, which happens due to a frame being progressively rendered and written to the buffer, not because it’s progressively transferred or displayed
If that’s how TFTs worked we wouldn’t have vsync settings in games.
No? Afaik vsync prevents the gpu from sending half drawn frames to the monitor, not the monitor from displaying them. The tearing happens in the gpu buffer Edit: read the edit
Though I’m not sure how valid the part about latency is. In the worst case scenario (transfer of a frame taking the whole previous frame), the latency of an lcd can only be double that of a crt at the same refresh rate, which 120+ hz already compensates for. And for the inherent latency of the screen, most gaming lcd monitors have less than 5 ms of input lag while a crt on average takes half the frame time to display a pixel, so 8 ms.
Edit: thought this over again. On crt those 2 happen simultaneously so the total latency is 8ms + pixel response time (which I don’t know the value of). On lcds, the transfer time should be (video stream bandwidth / cable bandwidth) * frame time. And that runs consecutively with the time to display it, which is frame time / 2 + pixel response time. Which could exceed the crt’s latency
BUT I took the input lag number from my monitor’s rtings page and looking into how they get it, it seems it includes both the transfer time and frame time / 2 and it’s somehow still below 5 ms? That’s weird to me since for that the transfer either needs to happen within <1 ms (impossible) or the entire premise was wrong and lcds do start drawing before the entire frame reaches them
Although pretty sure that’s still not the cause of tearing, which happens due to a frame being progressively rendered and written to the buffer, not because it’s progressively transferred or displayed