Compared with current ASML EUV technology, SSMB is a more ideal light source. It has a higher average power and higher chip production output with lower unit cost.
ASML creates an EUV source from laser-produced plasma, where strong laser pulses are projected to liquid microdroplets of tin. The laser crushes the droplets and produces EUV pulse light during the impact. After complex filtering and focusing, an EUV light source with a power of about 250W is produced.
Before reaching the chip, the EUV beam undergoes reflection from 11 mirrors, each causing about a 30 per cent energy loss. As a result, the power of the beam is less than 5W when reaching the wafer. This can become an issue when manufacturing turns to 3nm or 2nm.
SSMB technology avoids such concerns. SSMB beams achieve a higher output power of 1000W, and due to its narrow bandwidth, fewer reflecting mirrors are needed, which naturally generates higher terminal power.
I do think there is a lot of potential for alternative computing substrates like photonics or graphene.
This kind of stuff could end up being like going from vacuum tubes to transistors. We’re pushing the limits of what’s physically possible with silicon now, but even a crude alternative substrate could naturally afford far better performance, and then could be optimized for decades on end.
here’s an archived version https://archive.ph/NrC6B
it does mention the advantages over ASML approach
I do think there is a lot of potential for alternative computing substrates like photonics or graphene.
Incidentally, there was a breakthrough fabricating 12-inch wafers with MoS2 which has potential to be a much faster substrate than silicon https://www.sciencedirect.com/science/article/abs/pii/S2095927323004206
This kind of stuff could end up being like going from vacuum tubes to transistors. We’re pushing the limits of what’s physically possible with silicon now, but even a crude alternative substrate could naturally afford far better performance, and then could be optimized for decades on end.