I know, right? It’s so hard to “really” mess something up and Toolboxes are very cool for things not served by Flatpaks or Overlays.
I know, right? It’s so hard to “really” mess something up and Toolboxes are very cool for things not served by Flatpaks or Overlays.
Regarding your not wanting to go with an immutable distro: what configs are you thinking you’ll need to mess with that makes an immutable distro a bad idea exactly? I was previously on the fence about it as well but Bazzite has absolutely served my needs and requires way less fiddling than my previous Nobara install did after major updates. I have yet to find any day to day configurations that I haven’t been able to overcome with OSTree overlaying. Aside from being immutable, Bazzite literally checks every other box you’ve got listed.
I believe it’s more a “the PS3 CPU architecture was an absolute nightmare and emulating it is difficult/slow” more than it had anything to do with the graphics rendering portion- which is typically where phones would have made the most substantial advancements. There are specific instruction sets that need to be supported by any CPU emulating PS3 to run anywhere near native speed… And I don’t believe much work has been done for ARM cpu’s to support the needed instructions in mobile devices.
Why would I recommend Fileflows? It was a little more user friendly in my experience without requiring pulling in configurations from other sources. I know there are repos chalk full of Tdarr settings and configs, but for simple setups and DIY I preferred the Fileflows interface. The end result is basically the same, so pick your poison.
Isn’t AMD’s HEVC/265 still decent, specifically? I feel like I read that somewhere years back. 264 has always been a weak spot for them, however.
I might recommend fileflows over tdarr- but either way some kind of similar solution is almost mandatory with the grab bag of arbitrary encodings you find out there.
Atomic OS’s (especially Fedora based) with Nvidia are going to be a bit of a pain. Did you follow all the instructions found Here ? I personally gave up on silverblue/kinoite after I tried Bazzite. Similar bases, but the Bazzite devs paid special attention to GPU and accessory drivers/implementations that are otherwise much more painful in Fedora Atomics. You can always do a clean rebase then re-run the steps above (only the OSTree section).
Xbox controllers (Xbox One and newer) have been absolutely solid for me with the xone driver + xpadneo, regardless of distro. Bazzite has everything I need baked in, so it was completely plug and play. Not a very interesting answer, I know. But it still blows me away that it “just works.”
Very true. But brute force checking through tons of different settings for each camera you need to configure is not fun. I couldn’t seem to find any kind of “known working configs” database or anything either. Every camera seems to be different in what it expects, outputs, authenticates, etc. Once it’s set up, I agree, maintaining the config is easier. Having all your cameras match in model and firmware version probably makes the whole endeavor MUCH easier.
AmCrest and Frigate together are SO good. Integrating Frigate with Home Assistant was also insanely easy for quick viewing and notifications. That initial Frigate config is a bit of a bear- but once you’re past that I cannot speak more highly of it.
hunter2
Alright, where’s my replacement once my current Fitbit dies? What company makes a watch that tracks steps, heart rate, sleep, spO2, notifications, is generally water resistant (light swimming) and has a battery that lasts ~5+ days? Bonus points for open firmware/hardware that doesn’t require me to design my own apps/systems for each of those items. I don’t even use most of what my Versa 3 can do, but I know it won’t last forever and I’d at least like an idea of where to go if/when it breaks down.
Proton experimental and (at least as of yesterday) I had to opt into bleeding edge beta as well or I’d just get black screen at launch.
No stuttering for me on Linux… Runs as good as it ever has but the visuals are even that much better due to the engine upgrades. Not a fan of the new UI, but the old UI was clunky too, so I can’t really say it’s even a step backwards.
On windows the article mentioned being a microcode patch via Windows update. Linux would be similar- but via a kernel update most likely. I’d assume that a general BIOS update would also do the trick, but then you’re relying on motherboard vendors and it’s unlikely many would provide such an update to older hardware, even if it’s still widely used.
Difficult to exploit, already in the process of being patched. Truly, the most breaking of news.
I think they meant it as “once infected may be impossible to disinfect.” But it sure doesn’t read that way at first glance.
I’ve had good luck with AsRock as well. Before this most recent generation I was Sapphire all the way. But they charge a good premium now that I don’t feel is worthwhile if you’re in the ~7600xt range or lower.
Ah yes, like Tribes or any other Fps-Z style game…
Adding repos can just be done inside a Toolbox, or even as Overlays. Grub can also be edited and changes applied to immutable OS’s like Bazzite/Kinoite. I’d definitely say give it a shot on a non-daily driver machine and see how you like it. Having the option to mess with the underpinnings can be nice- but not having to has a lot of value as well.