Look at the very least you should write in the blogpost clearly which parts are generated by LLMs, so your readers can decide whether to trust them.

Idk man, it seems pretty irresponsible to me to write a blogpost with stuff that you got from ChatGPT without understanding it. People will assume that if you wrote a blogpost on this then you know what you’re doing. ChatGPT gets stuff wrong all the time, and we’re talking about firewall configuration here. If it misconfigured some stuff it could leave you and your readers vulnerable to all kinds of shit.

In this case it seems to me that (luckily) there’s just a bunch of redundant routing, but the next time it could be leaking your and your readers’ torrent traffic out of the VPN tunnel, leaving you vulnerable to legal repercussions for piracy.

Please don’t authoritatively post stuff that you got from the automatic bullshit generator without understanding it.

Nice, I recently went through the same struggle of setting up this configuration based on that LinuxServer post. My main nitpick on this is that automating the ip route configuration for the qBittorrent container is a pretty important step which is not explained in the post. Leaving any manual steps in any Docker setup is pretty bad practice.

Since you’re using LinuxServer’s QBT image a good way to do this is to make use of their standard custom init scripts. You can just mount a script with the ip route commands to /custom-cont-init.d/my-routes.sh:ro on the container and it will be run automatically on each startup.

Another nitpick is that the PostDown commands in the wireguard configs are useless since you’re running them in Docker.

Fantastic, thank you

Wow thank you, this is the most useful reply I’ve received so far!

This means I don’t need to mess around with QBT’s “proxy” settings? I was pretty confused since the only options available are SOCKS/SOCKS5 and HTTP, but I’m guessing that’s a different kind of proxy than what I need…

I indeed have a domain name pointing to the VPS IP, with Caddy managing TLS. Other apps are exposed this way, and I will do the same for the qBittorrent WebUI as well. I like having Caddy as a single gateway where I can apply security configs and monitor all traffic, I was hoping I would be able to pass torrent traffic through it as well but everybody seems very much against it.

I already have wireguard setup as you describe so I guess I’ll just give up on passing torrent traffic through the proxies and just open a localhost port on the qBittorrent container…

Resetting the “time since last being told I don’t know shit on the internet” back to 0 once again…

I already have an existing and working setup used for other apps, it’s close to the one described in this blogpost. Yes, it’s complicated and inefficient, but it has reasons to be. I want to keep my qBittorrent configuration as close to this setup as reasonably possible for consistency. If your point is that it’s counterproductive to follow this setup then… fair enough. I can just route traffic from the VPS to an exposed port on the local qBittorrent container over Wireguard, but that wasn’t my preferred solution.

Running a torrent client through a proxy doesn’t isolated a process.

I was talking about network isolation, not process isolation.

make sure your traffic is routing there properly

That was pretty much what I was asking for help with.

I have already set up all of that. My setup is similar to the one in this blogpost and it’s already working for various apps that only use HTTP. What I’m trying to do is to also route BitTorrent traffic (TCP/UDP) over the same setup without opening up entirely new paths.

Yes I already have that set up with Wireguard, what I’m figuring out is how to route traffic through it.

I’m guessing what you mean is setting up port forwarding in Wireguard…

The thing is ideally I would want all connections in and out of my homeserver’s Docker network to go through the local Caddy proxy, so the app containers are isolated. That still means having at least the local Caddy acting as a TCP proxy, even if the VPS Caddy is bypassed. If that’s too much of a hassle though I can instead just expose a port on the qBittorrent container directly to the homeserver’s localhost, and forward that with wireguard to the VPS.

By “set up wireguard to route through the VPS” you mean having wireguard forward a port from the VPS to a port on the homeserver at its wireguard IP address?

qBittorrent will still need to publish the right IP address to peers though, right? So I will need to configure the proxy VPS’s IP address in qBittorrent…

Also that means binding a port on the qBittorrent container directly to the homeserver localhost. I’ve managed to keep the app containers isolated so far and it’d be nice to keep that, but if proxying the traffic is too annoying I guess I can just say fuck it and go with it.

Wild ass comment.

Unless you really really need portability between devices

Who doesn’t??? What do you do, copy 20-char randomly generated passwords manually all the time? That’s the whole point of password managers…

I use firefox’s local, inbuilt manager

Browsers are NOT a secure storage for sensitive data, if you want a local password manager at least please use KeePassXC.

The thing that pisses me off the most is that they are disingenuous almost to the point of lying in interpreting that survey’s results. They say that 75% of users are interested in GenAI, when actually what they asked is whether people have used any GenAI at all in the recent past. And that still doesn’t mean they want GenAI in Proton. That’s a pretty significant sleight of hand. The more relevant question would have been the first one on what service people want the most. In that case only 29% asked for a writing assistant, which is still not the same thing as a full LLM. The most likely answer to “how many Proton customers want an LLM in Proton Mail” seems to be “few”.

This is old drama at this point. I’ll repeat what’s been said the previous times this was posted.

Proton did what they were legally required to do in the jurisdiction where they operate as a legitimate business. As an encrypted email provider they offer privacy but not necessarily anonymity, and they’re open about that. They even have multiple blogposts about how to use their service more anonymously. If you thought that by using ProtonMail you were getting full anonymity that’s your mistake.

In both the cases mentioned the users made OpSec mistakes: not using a VPN in one and linking their personal Apple email as a recovery email in the other. In the first case Proton wasn’t even logging the user’s IP until the police forced them to.

Thank you for the links, I had found a few of these but some are new. The basic idea is there, I’ll see if any of these can work for us. I’m growing more convinced though that hosting a whole app for this super simple use case might not be worth it, I think we might pivot to just hosting a really basic static page for it.

This is way too overkill for what we need. I’m sorry, I’ve been intentionally vague about the context for this but I guess it’s too unclear. We’re an activist group planning a protest. We might have to get this set up literally tomorrow and every penny comes out of (mostly my) pocket. We’re also all paranoid about opsec and anonymity, which is why the requirement about avoiding corporate services is there. Perhaps I should have posted this in a privacy focused comm instead, I apologize.

It’s pretty overkill for what we need, and it would still fall under “corporate” for us. At that point I could just go for the static Notion page which I can get live in 5m for free.

We can set up all of those but again, that’s kinda expensive for us rn. What’s the benefit of using a CMS like Joomla versus wishthis, or even a basic Caddy/Nginx webserver with a static page?

I had high hopes when I tried it out but frankly it’s been almost unusable for me. Terrible performance, laggy UI, plenty of bugs, long loading times for songs…

I don’t know if something in my mobile environment was messing with it but I use quite a few indie FOSS apps still in beta and none of them worked as badly as Spotube did. I’d love to go back to it if it improves, but for now it’s just not worth the UX pain.

Edit: forgot to mention. The idea of sourcing tracks from YouTube is cool but causes loads od trouble in practice. I’ve found remixed versions streamed as the original, tracks with the intro from the music video, tracks with sound effects from the music video, and tracks that just cannot be streamed cause they aren’t on YouTube. I know there’s a feature to pick which version to stream, but it’s quite a bit of UX friction and it didn’t work often enough to be a showstopper.

Bold of an English speaker to accuse any other language of unpredictable spelling…

Funnily, Italian is almost completely phonemic, meaning it’s trivial to both spell and read words if you know the rules. English can only dream of that.